How to Create a Meme Coin in 2026 (Solana, Base, Ethereum): Step by Step

In dit artikel
- What you need before you start
- Pick the chain: Solana, Base, BNB Chain or Ethereum
- Create the token in seven steps
- What it costs in November 2026
- Three ways to launch: iMintify curve, pump.fun or your own token
- Add liquidity and lock it
- Tokenomics that survive a RugCheck
- Website, socials and the first 48 hours
- Is it legal to create a meme coin?
- Mistakes that kill a launch
- Frequently asked questions
You can create a meme coin in about twenty minutes without writing code: pick a chain, set the name, ticker and supply, deploy from your own wallet, revoke the authorities buyers check for, and add liquidity so people can trade it. The token itself costs under a dollar on Solana or Base in November 2026. The part that costs real money is the liquidity you put in the pool, and the part that decides whether anyone buys is everything you do before launch day.
Twenty minutes for the token. Weeks for the community.
No money for a pool? Since November 2026 you can also launch on a bonding curve: about 0.02 SOL in network fees, tradable in a minute, no liquidity of your own, and you keep earning 0.4% on every buy and sell for as long as the coin trades. The comparison of the three routes is further down; the rest of this guide covers the classic route where you own the full supply.
Below are both halves, with current prices, the pump.fun question, and the checks tools like RugCheck run on your coin the second it goes live. It covers Solana (SPL) and the EVM chains (Ethereum, Base, Polygon, BNB Chain), because the meme coin creator deploys on all of them.
What you need before you start
A wallet with a little gas, a name people can say out loud, and a reason for the coin to exist beyond "number go up".
No developer, no command line.
- A wallet. Phantom, Solflare or Backpack for Solana; MetaMask or Rabby for Ethereum, Base, Polygon and BNB Chain. The token deploys from this wallet, so it is yours from the first second.
- Gas. Around 0.05 SOL covers the token and a small pool on Solana. On Base or BNB Chain a few dollars of ETH or BNB is plenty. Ethereum mainnet needs more, see the cost table below.
- Name, ticker, logo. Keep the ticker to three to five letters. A square logo of at least 512 by 512 pixels, PNG or JPG. The AI generator makes a mascot in a minute if you have none.
- A one-line story. The joke, the character or the community the coin belongs to. You will paste it into the metadata, the website and every post for the next month.
Most people spend an evening on the story and five minutes on the rest. Keep that ratio.
Pick the chain: Solana, Base, BNB Chain or Ethereum
Solana is where most meme coins launch, because the token and the pool together cost less than a coffee and trading is instant. Base and BNB Chain are the EVM alternatives with real retail volume. Ethereum mainnet only makes sense when you want the deepest liquidity and are fine paying for it.
| Chain | Standard | Deploy the token | Create a pool | Where it trades |
|---|---|---|---|---|
| Solana | SPL | about 0.006 SOL, under $0.50 | 0.02 SOL (Meteora) to 0.2 SOL (Raydium) | Raydium, Meteora, Orca, routed by Jupiter |
| Base | ERC-20 | a few cents | cents on Uniswap v4 or Aerodrome | Uniswap, Aerodrome |
| BNB Chain | ERC-20 (BEP-20) | about $0.05 | well under a dollar | PancakeSwap |
| Polygon | ERC-20 | a few cents | cents | Uniswap, QuickSwap |
| Ethereum | ERC-20 | $0.20 on a quiet weekend, $2 to $11 on a busy weekday | $25 to $200 for a Uniswap v3 pool, far less on v4 | Uniswap |
Most readers of this guide end up on Solana or Base.
Why Solana is so cheap right now. Solana charges rent for the bytes an account takes up, and that rate was cut twice in September 2026 (SIMD-0437). A token mint, its metadata account and your first token account add up to roughly 0.006 SOL at the current rate. Further cuts are scheduled, so this number only goes down.
Create the token in seven steps
The creator asks the same seven questions on every chain. Most people click through them in five minutes; the two that matter are the authorities at the end.
- Name and ticker. The name is what shows in wallets, the ticker is what people type. Check the ticker on DEXScreener first so you are not the fourth $PEPE2 of the week.
- Decimals. 6 or 9 are the normal choices on Solana, 18 is the default on EVM chains. With a one-billion supply, 6 decimals keeps prices readable. Decimals cannot be changed later.
- Total supply. One billion is the meme coin convention because it makes the price per token tiny, which people like. Decide now how that supply splits between the pool, the community and you, see the tokenomics section.
- Logo, description and links. The result is the on-chain metadata that wallets, DEXScreener and Jupiter read. Put the website and your X handle in now; buyers trust a coin with links more than one without.
- Metadata: mutable or locked. Keep it mutable until the logo and links are final, then lock it. A locked metadata record tells buyers nobody can swap the logo for a scam later.
- Revoke mint authority. Every rug checker flags this field first. With mint authority active you could print more tokens and dilute every holder. Revoke it before you add liquidity.
- Revoke freeze authority. Freeze authority lets you lock tokens in someone's wallet. Raydium will not even let you open a pool while it is active. Revoke it.
Steps six and seven are the ones that matter.
Then sign once. On iMintify the creator itself is free to use; deploying costs a small amount of credits plus the chain's network fee, the current number is on the pricing page. The contract is an audited standard token and it lands in your wallet, not in ours.
What it costs in November 2026
Under a dollar for the token on every chain except Ethereum mainnet, a few dollars for the pool, and then whatever you decide to put in as liquidity.
The token is the cheap part.
Prices change with gas and with the SOL and ETH rate. The figures above were checked on 14 November 2026; weekday gas on Ethereum is usually several times the weekend number.
Three ways to launch: iMintify curve, pump.fun or your own token
Pick by one question: do you have SOL to put in a pool, and do you need the supply in your own wallet? If not, launch on a curve. If yes, the classic route in this guide gives you the most control.
| iMintify launch (curve) | pump.fun | Your own token | |
|---|---|---|---|
| Cost to launch | about 0.02 SOL network fees | free (0.025 SOL if you buy at launch) | under $0.50 plus the pool |
| Liquidity you put in | none | none | yours, 2 SOL and up |
| Tradable | within a minute | within a minute | once your pool is funded |
| Fee on every trade | 1%, of which 0.4% to you on every buy and sell, also after graduation | 1.25%, of which 0.30% to you | none |
| Supply in your wallet | no, you buy from the curve like everyone | no | yes, all of it |
| Airdrop or treasury allocation | no | no | yes |
| Liquidity locked | automatically at graduation (about 88 SOL) | LP burned at graduation | you lock or burn it |
| Chains | Solana | Solana | Solana, Ethereum, Base, Polygon, BNB |
The curve is Meteora's Dynamic Bonding Curve, the same audited program under Jupiter Studio and Bags; how it works in plain words is on the meme coin creator page and in Meteora's bonding curve explained. A fuller head-to-head with pump.fun is in pump.fun vs your own token.
A fair rule: a quick meme you want trading today goes on a curve, ours or pump.fun's. A coin with an airdrop, a treasury or a listing plan goes on the classic route below.
Add liquidity and lock it
Launching on the curve? Skip this section: the buyers fund the liquidity and it locks itself at graduation.
A token without a pool is a collectible. The pool gives it a price, and locking or burning the pool tokens tells buyers you cannot pull the rug.
Lock it before you announce it.
On Solana you have three good options. Meteora DAMM v2 is the cheapest (about 0.02 SOL) and has liquidity locking built in. Raydium CPMM costs about 0.2 SOL and is what most tools and aggregators expect; its Burn & Earn feature locks the position permanently while you keep collecting the trading fees through an NFT. Orca charges no creation fee. Whichever you pick, Jupiter routes trades to it within minutes, so buyers do not need to know which DEX you chose.
On Base, open the pool on Uniswap v4 or Aerodrome; on BNB Chain use PancakeSwap. Uniswap v4 made pool creation about 99% cheaper than v3, so even mainnet is affordable again if you avoid v3.
How much to put in is a judgement call, not a formula. A pool with 2 SOL on each side moves 10% on a 0.2 SOL buy, which is fine for a community coin and terrible for anything that wants to look serious. Decide the price you want the first buyer to see, work back to the amount of tokens and SOL that gives that price, and make sure you can afford to leave it locked.
The iMintify creator has the pool and lock tools built in, and the free website shows a buy button wired to the pool as soon as it exists. Read what a liquidity pool is if you want the mechanics.
Tokenomics that survive a RugCheck
Buyers run your contract address through RugCheck, DEXScreener or a Telegram bot before they buy, and those tools all check the same five things: mint authority, freeze authority, how much of the pool is burned or locked, how concentrated the top ten holders are, and whether metadata is still mutable. Design the supply so every one of those comes back green.
A fair-launch split that passes, with a one-billion supply:
| Allocation | Share | Tokens | Purpose |
|---|---|---|---|
| Liquidity pool | 40% | 400,000,000 | Paired with SOL or ETH, position burned or locked |
| Public airdrop and contests | 50% | 500,000,000 | Sent with the multisender to early community, meme contests, claims |
| Community reserve | 10% | 100,000,000 | Public wallet, announced, used for later rewards |
No presale, no team allocation, no vesting to explain.
If you do want a team share, keep it under 10%, lock it with a vesting contract and say so on the website. The thresholds third-party checkers use are rough but consistent. Top ten holders under 25 to 30% of supply, no single wallet over 20%, pool burned or locked for at least six months. The pool wallet and a burn address do not count against you.
Website, socials and the first 48 hours
The coin needs a place to point people to before the first post goes out. On iMintify the meme coin website is generated from your token data when you deploy: logo, story, contract address, buy button, socials. Swap the images, add a roadmap if you have one, put it on a subdomain or your own domain.
Same minute, everywhere.
Paste the contract address and the pool link in every channel at once, so nobody can front-run your own community with a fake address. Run the airdrop to the first holders the same day. Submit to DEXScreener (free, your pool appears automatically once it has trades) and later to CoinGecko and CoinMarketCap, which take longer and want a working website and socials, see how to list a token. Keep posting the meme, not the chart. Coins that talk about their price all day read as exit liquidity.
Is it legal to create a meme coin?
In most places, yes, creating a token is legal; lying about it is not. In February 2025 the SEC's Division of Corporation Finance stated that most meme coins are not securities under US law, while making clear that fraud remains fraud. A New York court reached a similar conclusion for two pump.fun tokens in August 2026. In the EU, ESMA's 2026 guidance puts tokens without an identifiable issuer outside the MiCA white-paper rules; a named company issuing a token may need one unless an exemption applies. None of this is legal advice, and it changes: check your own jurisdiction, keep your claims honest, and never promise returns.
Mistakes that kill a launch
Most dead launches die of one of these.
- Adding liquidity before revoking mint and freeze authority. Every checker flags it and Raydium blocks the pool anyway.
- Keeping 30% in a single wallet "for marketing". That wallet shows up as the top holder and the coin is dead on arrival.
- A pool so thin that the second buyer doubles the price and the third one dumps it.
- Posting the contract address in one place first. Scammers clone it within minutes.
- Mutable metadata with a placeholder logo a week after launch.
- No website. A coin whose only home is a DEXScreener page looks like it will be gone by Friday.
Frequently asked questions
Can I launch a meme coin without adding liquidity?
Yes, on a bonding curve. On iMintify you pay about 0.02 SOL in network fees, the coin is tradable within a minute, buyers' SOL is the liquidity, and you earn 0.4% of every trade. The trade-off is that you do not receive the supply up front.
How much does it cost to create a meme coin?
Under $0.50 for the token on Solana, a few cents on Base, Polygon or BNB Chain, and anywhere from $0.20 to $11 on Ethereum mainnet depending on gas. Add 0.02 to 0.2 SOL for the pool on Solana, plus the liquidity you choose to put in. Those are November 2026 numbers.
Can I create a meme coin for free?
pump.fun creates the token for free and takes 1.25% of every trade instead. With your own token you pay the network fee once, under a dollar on most chains, and there is no fee on trades afterwards.
Do I need to know how to code?
No. A no-code creator writes and deploys the standard contract for you. You choose the name, supply and authorities; the contract is the same audited code either way.
How long does it take?
Five minutes for the token, another fifteen for the pool and the website. The weeks before, building the community, are the actual timeline.
Which blockchain is best for a meme coin?
Solana for cost and speed, which is why most meme coins live there. Base when your audience is on Coinbase, BNB Chain for retail volume on PancakeSwap, Ethereum only when deep liquidity matters more than fees.
How do meme coin creators make money?
On pump.fun, from the 0.30% creator share of trading fees. With your own token, from the trading fees of a locked pool position (Raydium Burn & Earn pays them out), from a disclosed and vested team allocation, or not at all if you launched it for the community.
How do I prove my coin is not a rug pull?
Revoke mint and freeze authority, lock the metadata, burn or lock the pool position, keep the top ten holders under 25 to 30% of supply, and publish the addresses of any reserve wallets. Then run the contract through RugCheck yourself and screenshot the result.
Can I launch on Solana and Ethereum at the same time?
You can deploy an SPL and an ERC-20 with the same name, but they are two separate tokens with two pools. Most projects pick one chain to start and bridge later if there is demand.
Bouwt de tools van iMintify en schrijft de handleidingen. Praktisch, stap voor stap, met de knoppen erbij.







